Culligan Iron-Cleer Plus Specifications download pdf (Page 6)

Specifications

2 Culligan

Iron-Cleer

Plus Water Filters

Culligan

Iron-Cleer

Plus Water Filters

10” Iron-Cleer 12” Iron-Cleer

Control Valve 1” reinforced thermoplastic 1” reinforced thermoplastic

Timer Electro-mechanical Electro-mechanical

Overall Conditioner Height 67” 65”

Media Tank Dimensions (D x H) 2 ea. 10” x 54” tanks 2 ea. 12” x 52” tanks

Filter Media Type 1.0 cu. ft. birm 1.5 cu. ft. birm

Underbedding

G-50 35 lbs. 35 lbs.

Cullsan U 25 lbs. 25 lbs.

Capacity

1400 gallons 2000 gallons

Freeboard

21” 18”

Max. Clear Water (Soluble) Iron 10 ppm 10 ppm

Max. Hydrogen Sulfide 5.0 ppm 5.0 ppm

Minimum Alkalinity 100 ppm 100 ppm

pH for Iron Removal 7.0 - 8.5 7.0 - 8.5

pH for Hydrogen Sulfide Removal 6.5 - 7.5 6.5 - 7.5

Service Flow @ Pressure Drop (Clean Bed)

Normal 5 gpm @ 9 psi 7 gpm @ 10 psi

Maximum

6 gpm @ 11 psi 9 gpm @ 14 psi

Operating Pressure 20-60 psi 20-60 psi

Operating Temperature 33-120° F (1-48° C) 33-120° F (1-48° C)

Electrical Requirements 120 Volts/60 Hz 120 Volts/60 Hz

Power Consumption, Continuous/

Maximum

3 watts/203 watts 3 watts/203 watts

Drain Flow, Maximum 10 gpm (5.5 gpm minimum required) 10 gpm (8.0 gpm minimum required)

Regeneration Time

Backwash 5 - 20 minutes 5 - 20 minutes

Fast Rinse 5 - 20 minutes 5 - 20 minutes

1 Capacity based on 4 gpm and 10 mg/L of dissolved iron.

2 Measured from top of media bed to top of inlet fitting.

3 Max flow rates & pressure drop characteristics have not been validated by the Water Quality Association.

The max specified flow rate at which the system will deliver treated water as validated by the Water Quality Association is defined

as service flow.

1 2 3 4 5 6 7 8 9 10 11 ... 51 52

Comments to this Manuals

No comments

Culligan Iron-Cleer Plus Specifications Page 6

Comments to this Manuals

Related products and manuals for Water dispensers Culligan Iron-Cleer Plus