Culligan Iron-Cleer Plus Specifications download pdf (Page 46)

Seal Pack Assembly

Follow the instructions for the replacing drive motor assembly through step 7, then continue as follows:

1. With the drive motor set aside, firmly pull the seal pack assembly from the valve body.

2. Lightly lubricate the o-rings of the replacement seal pack with silicone grease.

3. Reverse the procedure for reassembly.

Eductor Piston/Eductor Sleeve Assembly

Follow the instructions for the replacing drive motor assembly through step 7, then continue as follows:

1. With the drive motor set aside, firmly pull the eductor piston & sleeve assembly from the valve body.

2. Lightly lubricate the o-rings of the replacement piston & sleeve assembly with silicone grease.

3. Reverse the procedure for reassembly.

42 Culligan

Iron-Cleer

Plus Water Filters

Caution! Do not twist the seal pack upon insertion. This can cause the outer o-rings to pinch, cut, or crimp.

Note: Use only silicone grease; petroleum-based lubricants will cause the degradation of the rubber components.

Note: The eductor piston & sleeve assemblies are unique to the softener, filter, and controls. Refer to the parts list to

ensure that the proper assembly is used.

Note: Use only silicone grease; petroleum-based lubricants will cause the degradation of the rubber components.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

No comments

Culligan Iron-Cleer Plus Specifications Page 46