Culligan GoodWater Machine DrinkingWater System Specifications download pdf (Page 7)

COMPONENT DESCRIPTION / 5

Component Description

Tubing Connectors

The Aqua-Cleer

/Good Water Machine

™

system features

reliable and convenient push-to-connect (Fig. 1) tubing

connectors. Tubing is easily connected and disconnected

from these fittings as follows.

Connect:

Cut the tubing squarely with a sharp knife. Be careful

not to crush the tubing. To avoid leaks, make sure the

tubing end is smooth and free of burrs and abrasions.

Lubricate the end of the tube with water or a light coat

of silicone and push the tube end firmly into the fitting.

You should feel it push past the O-ring. Avoid bending

the tubing sharply away from the fitting.

Disconnect:

Hold the collar against the fitting body and

pull the tube from the fitting.

In the unlikely event that the connection leaks, remove and

recut the tubing. Check the inside of the fitting for debris or

O-ring damage. Reconnect.

FIG. 2

FIG. 1

Push-to-connect tubing connectors grip the outside diam-

eter of the tube. To help assure a reliable connection, it is

important to use high quality tubing with a consistent out-

side diameter. Culligan recommends that the tubing listed in

the “Suggested Installation Equipment” section of this manual

be used with the Aqua-Cleer/Good Water Machine system.

Manifold/Main Filter Assembly

• Manifold Assembly

The manifold assembly Fig. 2 item (1) serves as the func-

tional hub (Fig. 2) of the Aqua-Cleer/Good Water

Machine system by directing the flow through each of

the system’s main components.

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

No comments

Culligan GoodWater Machine DrinkingWater System Specifications Page 7