Culligan GoodWater Machine DrinkingWater System Specifications download pdf (Page 6)

4 / AQUA-CLEER

/GOOD WATER MACHINE

™

DRINKING WATER SYSTEMS

Product Information

This manual covers the technical aspects of the Culligan

Aqua-Cleer

Good Water Machine

™

AC model drinking wa-

ter systems. It is important to read this manual thoroughly so

that you can properly apply, install, and service these

systems.

The substances removed by this system are not necessarily

in your untreated water. See Performance Data Sheet for

exact percentages of contaminant removal.

Packaging

The Aqua-Cleer system is shipped from the factory in two

cartons:

Carton 1: Carton 2:

• Filtration Assembly • Storage Tank

• Reverse Osmosis Membrane

Filter Element

• Particle Filter Element

• Activated Carbon Filter Element

• Polishing Filter w/Mounting Pad

• Parts Package, including:

• Faucet

• Tank Valve

• Mounting Bracket

• Product Literature

Note that the filter elements are shipped in their own sealed

packaging. This will help to simplify in-plant preparation of

the system and to maximize the shelf life of the RO

membrane filter element.

If the Aqua-Cleer system will not be installed immediately,

refrigerate the RO membrane filter element at 35°/40°F

(2°/5°C). DO NOT ALLOW TO FREEZE.

Warranty

A limited warranty is extended to the original end user from

Culligan. This warranty is printed on the back cover of the

Owner’s Guide.

Application Guidelines

The Aqua-Cleer/Good Water Machine system is designed for

use on potable water supplies meeting the guidelines out-

lined in Table 1. The system should be installed on your

home’s cold water line. The flushing stream should discharge

through an approved siphon break. Installation of this

system must comply with state and local laws and

regulations.

Nitrate units are not certified for nitrate reduction in

water supplies with a pressure less than 40 psi (280 kPa).

A booster pump is strongly recommended.

See the "Performance & Technical Information" section

of this manual for all applications where TDS

exceeds 1000 ppm (1000 mg/L). A booster pump is

strongly recommended.

The reverse osmosis membrane filter used in this system

may be damaged by chlorine. This system includes an

activated carbon filter which protects this element by

reducing chlorine. Influent chlorine should not exceed

3 mg/L.

High Efficiency Operation

The Aqua-Cleer system is designed for high-efficiency

operation. Soft water use is strongly recommended. For

maximum RO membrane filter life on all hard-water installa-

tions, adjust the capillary length as described in the

“In-Plant Preparation” section of this manual. (Not required

for LC-50)

Influent Water Characteristic

Pressure

40-120 psi (280-827 kPa)

Temperature 33-100°F (1-38°C)

Total Dissolved

Solids (TDS)

0-4000 ppm (0-4000 mg/L)

pH 5-10

Chlorine

0-3 ppm (0-3 mg/L)

Chloramine 0-3 ppm (0-3 mg/L)

Turbidity 0-10 NTU

Iron 0-1 ppm (0-1 mg/L)

Bacterial Quality Potable

TABLE 1

1 2 3 4 5 6 7 8 9 10 11 ... 26 27

Comments to this Manuals

No comments

Culligan GoodWater Machine DrinkingWater System Specifications Page 6

Comments to this Manuals

Related products and manuals for Water dispensers Culligan GoodWater Machine DrinkingWater System