Culligan Platinum Series Specifications download pdf (Page 26)

Programming

(cont.)

• Salt Dosage - This setting is used to set the salt dosage. The display will ﬁrst show

“dOSAGE” for two seconds and then display the default (or previously programmed value).

The proper units (lbs or kg) will appear according to dip # 7 setting (English/Metric). Adjust

the salt dosage with the “Up” or “Down” keys.

Pressing the “Program” key will save the setting and move to the next programming step.

• Cycle 1 Time - This setting is used to program the

cycle 1 time that is usually backwash. The time of the

cycle is kept in minutes. The display will show the

“BACKWASH” and “MINS” icons and the cycle time

in the right most digits. Adjust the value with the “Up”

or “Down” keys.

Pressing the “Program” key will save the setting and move to the next programming step.

• Cycle 2 Time - This setting is used to set the time in

minutes for cycle 2. This cycle is brine draw / slow

rinse for softeners. The display will show the “BRINE

RINSE” and “MINS” icons and the cycle time in the

right most digits. Adjust the value with the “Up” or

“Down” keys.

Pressing the “Program” key will save the setting and move to the next programming step.

• Cycle 3 Time - This cycle is the Fast Rinse for

softeners. The display will show the “Fast Rinse” and

“Mins” icons and the cycle time in the far right digits.

Adjust the value with the “Up” and “Down” keys.

Pressing the “Program” key will move to the next

programming step.

• Cycle 4 Time - This cycle is the Reﬁll for softeners.

The display will show the “Reﬁll” and “Mins” icons

and the cycle time in the far right digits.

Pressing the “Program” key will move to the next

programming step.

KG 3.O

Note: This setting also appears during Aqua-Sensor

Programming.

Note: This setting also appears during Aqua-Sensor

Programming.

Note: This setting also appears during Aqua-Sensor

Programming.

Note: This setting CAN NOT be adjusted!

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

No comments

Culligan Platinum Series Specifications Page 26