Culligan Platinum Series Specifications download pdf (Page 4)

Culligan

Platinum Series Water Conditioners with Aqua-Sensor

Device or

Soft-Minder

Meter

9” Model 12” Model

Control Valve 5-cycle Reinforced 5-cycle Reinforced

Thermoplastic Thermoplastic

Overall Conditioner Height 53 in. (1,346 mm) 53-½ in. (1,346 mm)

Media Tank Dimensions (Dia. x Ht.) 9 x 44 in. 12 x 44 in.

229 x 1,118 mm 305 x 1,118 mm

Salt Storage Tank Dimensions 16 x 43 in. 18 x 43 in.

(Dia. x Ht.) 457 x 1,092 mm 457 x 1,092 mm

18 x 43 in.

457 x 1,092 mm

Exchange Media, Type & Quantity Cullex

Media, 0.86 ft

Cullex Media, 1.4 ft

Cullex Media, 24.5 L Cullex Media, 40 L

Underbedding, Type & Quantity Cullsan

Underbed, 12 lb. Cullsan Underbed, 30 lb.

Cullsan Underbed, 5.4 kg Cullsan Underbed, 13.6 kg

Exchange Capacity @ Salt 15,700 gr @ 4 lb. 19,800 gr @ 6 lb.

Dosage Per Recharge 1,017 g @ 1.6 kg 1,283 g @ 2.7 kg

22,000 gr @ 8 lb. 30,900 gr @ 12 lb.

1,426 g @3.6 kg 2,003 g @ 5.4 kg

24,000 gr @ 12 lb. 36,300 gr @ 18 lb.

1,555 g @ 5.4 kg 2,353 g @ 8.2 kg

Freeboard to Media

15.5 in. 18.25 in.

394 mm 464 mm

Freeboard to Underbedding

39 in. (991 mm) 39 in. (991 mm)

Salt Storage Capacity 250 lb. or 375 lb. 375 lb.

114 kg or 170 kg 170 kg

Rated Service Flow @ Pressure Drop

14 gpm @ 15 psi 16.8 gpm @ 15 psi

49 Lpm @ 103 kPa 72 Lpm @ 103 kPa

Total Hardness, Maximum 75 gpg (1,300 mg/L) 99 gpg (1,692 mg/L)

Total Dissolved Iron, Maximum 5 ppm (5 mg/L) 5 ppm (5 mg/L)

Hardness to Iron Ratio, Minimum 8 gpg to 1 ppm 8 gpg to 1 ppm

140 mg/L to 1 mg/L 140 mg/L to 1 mg/L

Operating Pressure 20 - 125 psi (140 - 860 kPa) 20 - 125 psi (140 - 860 kPa)

Operating Temperature 33 - 120°F (1 - 50°C) 33 - 120°F (1 - 50°C)

Electrical Requirements 24V/60 Hz 24V/60 Hz

Electrical Power Consumption, Min./Max. 3 Watts/45 Watts 3 Watts/45 Watts

Drain Flow, Maximum

2.0 gpm (8 Lpm) 3.5 gpm (14 Lpm)

Recharge Time, Average

68 min. 57 min.

Recharge Water Consumption 43 gal. (162L) 83 gal. (314 L)

1 Measured from top of media to top surface of tank surface.

2 Measured from top of underbedding to top surface of tank surface.

3 Backwash at 120 psi (830 kPa).

4 10 minute backwash, 4 lb. (1.8 kg) 9” model or 6 lb. (2.7 kg) 12” model salt dosage.

Specifications

1 2 3 4 5 6 7 8 9 ... 21 22

Comments to this Manuals

No comments

Culligan Platinum Series Specifications Page 4

Comments to this Manuals

Related products and manuals for Water dispensers Culligan Platinum Series