Culligan Iron-Cleer Plus Specifications download pdf (Page 3)

THANK YOU

AND WELCOME TO YOUR NEW WORLD OF BETTER

LIVING WITH CULLIGAN WATER.

The Culligan

Iron Cleer

water filters have been tested and certified by

WQA against WQA-200 for the effective reduction of iron up to 1,400

gallons for 10” units and 2,000 gallons for 12” units.

Do not use with water that is microbiologically unsafe or of unknown

quality without adequate disinfection before or after the system.

This system and its installation must comply with state and local regulations. The System is ONLY

to be supplied with cold water.

For installations in Massachusetts, the Commonwealth of Massachusetts Plumbing Code 248

CMR shall be adhered to. Consult your licensed plumber for installation of the system. This

system and its installation must comply with state and local regulations. The use of saddle

valves are not permitted.

If this is your first experience having filtered, conditioned water in your home, you’ll be amazed at the

marvelous difference it makes. We promise that you’ll never want to be without it again.

Congratulations, too, on selecting one of the “first family” of water filters in the prestigious Culligan

Iron-Cleer. With Culligan’s many years of knowledge and experience in water treatment, you can be

confident that the model you selected has been designed and engineered to provide years of service

with a minimum of care and attention.

Products manufactured and marketed by Culligan International Company (Culligan) and its affiliates

are protected by patents issued or pending in the United States and other countries. Culligan

reserves the right to change the specifications referred to in this literature at any time, without prior

notice. Culligan, Culligan Iron-Cleer, Cullar, Filtr-Cleer, Cullneu, Accusoft, Culligan Man and www.

culligan.com are trademarks of Culligan International Company or its affiliates.

1 2 3 4 5 6 7 8 ... 22 23

No comments

Culligan Iron-Cleer Plus Specifications Page 3