Culligan Iron-Cleer Plus Specifications download pdf (Page 39)

01021076

The following information can be displayed at the control valve or remote display. These settings are read-

only. Press

or to scroll through the settings. Press to view the previous setting.

Screen Display Range Setting Description

SOFTENING

JAN-01-12 12:01P

N/A

1. From the HOME screen, press

to view the main menu.

>1)INFORMATION

2)MANUAL MODE

1–6

2. The screen displays the main menu. Press

to select

1)INFORMATION.

SALT TANK LEVEL

OK,

Low

3. If a Salt Brine Tank is installed, this screen displays the

salt level. The status is OK unless the SBT probe detects

and overfilled brine tank or low salt level. If the screen

displays LOW a subsequent screen displays APPROX

DAYS OF SALT REMAINING. Press

to select the

next information screen.

REMAIN CAPACITY

100%

0–100

4. The screen displays the softening capacity remaining,

displayed as a percentage of the total capacity. During

manually initiated regeneration, assume 0 percent re-

maining capacity. Press

to select the next informa-

tion screen.

REMAIN CAPACITY

740 GAL

0–no

limit

5. The screen displays the softening capacity remaining,

measured in gallons (liters). Press

to see the next

information screen.

CURRENT FLOWRATE

0.0 GPM

0–no

limit

6. The screen displays the current flow rate, measured in

gallons (liters) per minute. Press

to see the next in-

formation screen.

TODAYs USAGE

0 GAL

0–no

limit

7. The screen displays today’s water usage, measured in

gallons (liters). Press

to see the next information

screen.

AVERAGE DAILY

300 GAL

0–no

limit

8. The screen displays average water usage for this config-

uration. Press

to see the next information screen.

Information

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 87 88

Comments to this Manuals

No comments

Culligan Iron-Cleer Plus Specifications Page 39

Comments to this Manuals

Related products and manuals for Water dispensers Culligan Iron-Cleer Plus