Culligan Drinking Water System Specifications download pdf (Page 16)

Troubleshooting Guide

Water Volume and Quality

Symptom Condition Action

No product water Water supply is turned OFF Turn water ON

Not enough Low water pressure Check source water line pressure

product water

Inlet water supply valve is blocked Clear restriction

Storage tank valve is closed Open storage tank valve

Storage tank is depleted Increase product water storage

capacity and/or install membrane

with higher output rating

Clogged pre-filter cartridge(s) Replace pre-filter cartridge(s)

Storage tank air pressure charge Empty water from storage tank

is low (product water faucet must remain

open while adjusting pressure) and

adjust pressure to 55 kPa (8 psig)

System does not Shut-off valve is not closing Contact your Culligan

Dealer

shut off

No drain water Clogged flow control Replace flow control (Item 6) in

parts list and contact your

Culligan

Dealer

Water has Carbon post-filter is depleted Drain storage tank, sanitize system

offensive taste and replace carbon post-filter

and/or odor cartridge

Membrane depleted or fouled Smartap

Quality Monitor reads

yellow, or if TDS test is

unsatisfactory, drain storage tank,

sanitize system and replace

membrane

Sanitizer not flushed out Drain storage tank and let it refill

overnight

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

No comments

Culligan Drinking Water System Specifications Page 16