Culligan Drinking Water System Operations Instructions download pdf (Page 6)

Technical Support: 1-800-721-9243, Monday-Friday, 8:00 a.m. – 4:30 p.m., CST

Performance Data - cont.

Organic Chemicals Included by Surrogate Testing:

Applies to US-EZ-4 Only

Substance

Inﬂuent Challenge

Concentration mg/L

Maximum permissible product water

concentration mg/L

alachor 0.050 0.001

atrazine 0.100 0.003

benzene 0.081 0.001

carbofuran 0.190 0.001

carbon tetrachloride 0.078 0.0018

chlorobenzene 0.077 0.001

chloropicrin 0.015 0.0002

2,4-D 0.110 0.0017

dibromochloropropane (DBCP) 0.052 0.00002

o-dichlorobenzene 0.080 0.001

p-dichlorobenzene 0.040 0.001

1,2-dichloroethane 0.088 0.0048

1,1-dichloroethylene 0.083 0.001

cis-1,2-dichloroethylene 0.170 0.0005

trans-1,2-dichloroethylene 0.086 0.001

1,2-dichloropropane 0.080 0.001

cis-1,3-dichloropropylene 0.079 0.001

dinoseb 0.170 0.0002

endrin 0.053 0.00059

ethylbenzene 0.088 0.001

ethylene dibromide (EDB) 0.044 0.00002

haloacetonitriles (HAN):

bromochloroacetonitrile 0.022 0.0005

dibromoacetonitrile 0.024 0.0006

dichloroacetonitrile 0.0096 0.0002

trichloracetonitrile 0.015 0.0003

haloketones (HK):

1,1-dichloro-2-propanone 0.0072 0.0001

1,1,1-trichloro-2-propanone 0.0082 0.0003

heptachlor 0.25 0.00001

heptachlor epoxide 0.0107 0.0002

hexachlorobutadiene 0.044 0.001

hexachlorocyclopentadiene 0.060 0.000002

lindane 0.055 0.00001

methoxychlor 0.050 0.0001

pentachlorophenol 0.096 0.001

simazine 0.120 0.004

styrene 0.150 0.0005

1,1,2,2,-tetrachloroethane 0.081 0.001

tetrachloroethylene 0.081 0.001

toluene 0.078 0.001

2,4,5-TP (silvex) 0.270 0.0016

tribromoacetic acid 0.042 0.001

1,2,4-trichlorobenzene 0.160 0.0005

1,1,1-trichloroethane 0.084 0.0046

1,1,2-trichloroethane 0.150 0.0005

trichloroethylene 0.180 0.0010

trihalomethanes (includes):

chloroform (surrogate chemical)

bromoform 0.300 0.015

bromodichloromethane

chlorodibromomethane

xylenes (total) 0.070 0.001

RC-EZ-3 Cartridges

This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the

substances listed below. The concentration of the indicated substances in water entering

the system was reduced to a concentration less than or equal to the permissible limit for

water leaving the system, as speciﬁed in NSF/ANSI 42 and 53.

Substance

Inﬂuent Challenge

Concentration

Maximum

Permissible

Product Water

Concentration

Reduction

Requirements

Minimum

Reduction

Average

Reduction

Standard 42

Chlorine 2.0 mg/L±10%

≥50%

96.2% 97.4%

Particulates

(0.5 to<1µm)-Class I

at least 10,000

particles/mL

≥85%

99.8% 99.9%

Standard 53

Cyst Minimum 50,000/L 99.95% 99.95% 99.9%

Turbidity 11 mg/L ± 1 NTU 0.5 NTU 96.4% 98.5%

Lead (pH 6.5) 0.15 mg/L ± 10% 0.010 mg/L 99.3% 99.3%

Lead (pH 8.5) 0.15 mg/L ± 10% 0.010 mg/L 94.8% 98.3%

Atrazine 0.009 mg/L ± 10% 0.003 mg/L 94.1% 94.1%

Lindane 0.002 mg/L ± 10% 0.0002 mg/L 94.5% 98.2%

Flow Rate=0.5 gpm (1.89 Lpm) Capacity=500 gallons (1893 L) or 6 months

Testing was performed under standard laboratory conditions, actual performance may vary

RC-EZ-4 Cartridges

This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the

substances listed below. The concentration of the indicated substances in water entering

the system was reduced to a concentration less than or equal to the permissible limit for

water leaving the system, as speciﬁed in NSF/ANSI 42 and 53.

Substance

Inﬂuent Challenge

Concentration

Maximum

Permissible

Product Water

Concentration

Reduction

Requirements

Minimum

Reduction

Average

Reduction

Standard 42

Chlorine 2.0 mg/L ± 10%

≥50%

96.2% 97.0%

Chloramines 3.0 mg/L ± 10% 0.5 mg/L 97.6% 98.0%

Particulates

(0.5 to<1µm)-Class I

at least 10,000

particles/mL

≥85%

99.9% 99.9%

Standard 53

MTBE 0.015 ± 20% 0.005 mg/L 69% 96.8% 96.9%

Cyst Minimum 50,000/L 99.95% 99.95% 99.9%

Turbidity 11 mg/L ± 1 NTU 0.5 NTU 96.6% 98.0%

Lead (pH 6.5) 0.15 mg/L ± 10% 0.010 mg/L 99.3% 99.3%

Lead (pH 8.5) 0.15 mg/L ± 10% 0.010 mg/L 94.1% 99.3%

Mercury (pH 6.5) 0.006 mg/L ± 10% 0.002 mg/L 96.7% 96.7%

Mercury (pH 8.5) 0.006 mg/L ± 10% 0.002 mg/L 96.6% 96.6%

Chloroform (VOC surrogate

chemical)

0.300 mg/L ± 10% 0.015 mg/L 99.8% 99.8%

Flow Rate = 0.5 gpm (1.89 Lpm); Capacity = 500 gallons (1893 L) or 6 months

Testing was performed under standard laboratory conditions, actual performance may vary.

Test Conditions:

Flow Rate = 0.5 gpm

Inlet Pressure = 60 psi (4.1 bar)

pH = 7.5 ± 1

Temperature = 68° F ± 5° F (20° C ± 2.5° C)

Operating Requirements:

Pressure = 30 - 100 psi (2.1 - 6.9 bar)

Temperature = 40° - 100° F (4.4° -37.7° C)

Turbidity = 5 NTU Max

WARNING: Do not use with water that is microbiologically unsafe or

unknown quality without adequate disinfection before or after the system.

NOTE: Substances reduced are not necessarily in your water. Filter must be

maintained according to manufacturer’s instructions, including replacement of

filter cartridges.

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Culligan Drinking Water System Operations Instructions Page 6

Comments to this Manuals

Related products and manuals for Sanitary ware Culligan Drinking Water System